You can recharge the batteries one of two ways.
• On board charging. With the batteries installed in the
scooter plug the charger into the charge port on the side of
the scooter. On board charging simultaneously charges
both batteries.
• Off board charging. Remove the batteries from the scoot-
er and charge each battery pack individually using the
charge ports on the batteries.
Note: Both battery packs cannot be charged simultaneously when
charged off board.
Charging Instructions
1. Plug your smart charger into a household outlet. The
green power light will blink indicating the charger is ready.
2. Plug the charger into the charge port located on the side
of the scooter or into the charge port on a battery pack
which has been removed from the scooter. The charger fan
will come on and the red light will begin blinking.
3. Once the battery charge is complete the red light will
become solid and the charger fan will shut off . Your scoot-
er will be fully charged in 5-6 hours. The smart charger
may be left plugged in for extended periods of time and will
never overcharge the battery.
CHARGING
• Battery
Charge Port
• Scooter
Charge Port
SX600 Manual 1/1/04 12:44 AM Page 9
