Version 0.6
26 August 2004
Page 19 of 52
For use with Vega 50 8 FXS + 2 FXO – SIP version 09.02.05.2 T003 or greater.
© 2004 VegaStream Ltd.
7. Configure Authentication
In some systems – to ensure that only authorised devices are allowed to set up and clear calls –
SIP authentication is used. If authentication is used, it is typically required on the SIP
REGISTRATION, INVITE, ACK and BYE messages.
For authentication, a userID and a password can be configured. The userID is constructed from
three parts
auth_usernumber_prefix, auth_usernumber and auth_usernumber_suffix
each of which may be configured with alphanumeric values.
The prefix and suffix entries are defined per POTS port profile and the
usernumber
is configured
per POTS port. Setting parameters to NULL tells the Vega to omit anything from this parameter
(capitalisation of NULL is important).
The values to enter here must match the values that have been configured as the authorisation
user and password in the proxy.
To configure Authentication, follow the following procedure:
On the left hand side menu select
SIP
Scroll down to the bottom of the page
