26
10 Supplement
VEGATOR 112 •
46106-EN-210714
Breaking capacity
1)
min. 50 mW, max. 500 VA, max. 54 W DC
Phase angle cos φ with AC
≥ 0.7
Switch-on/Switch-off delay
Ʋ
Basic delay
100 ms
Indicators
LED displays
Ʋ
Status, operating voltage
1 x LED green
Ʋ
Status fault signal
2 x LED red
Ʋ
Status, operating relay
2 x LED yellow
Adjustment
5 x DIL switch
Mode setting, line monitoring, two-point control
2 x test key
For line monitoring
Ambient conditions
Ambient temperature at the installation
site of the instrument
-20 … +60 °C (-4 … +140 °F)
Storage and transport temperature
-40 … +70 °C (-40 … +158 °F)
Relative humidity
< 96 %
Mechanical environmental conditions
Vibrations (oscillations)
Class 4M4 acc. to IEC 60721-3-4 (1 g, 4 … 200 Hz)
Impacts (mechanical shock)
Class 6M4 acc. to IEC 60721-3-6 (10 g/11 ms,
30 g/6 ms, 50 g/2.3 ms)
Electrical protective measures
Protection rating
IP 20
Overvoltage category (IEC 61010-1)
Ʋ
up to 2000 m (6562 ft) above sea level II
Ʋ
up to 5000 m (16404 ft) above sea
level
II - Only with connected overvoltage protection
Ʋ
up to 5000 m (16404 ft) above sea
level
I
Protection class
II
Pollution degree
2
Measures for electrical separation
Reliable separation according to VDE 0106 part 1 between all circuits
Ʋ
Reference voltage
253 V
Ʋ
Insulation resistance
5.1 kV
1)
If inductive loads or stronger currents are switched through, the gold plating on the relay contact surface will be
permanently damaged. The contact is then no longer suitable for switching low-level signal circuits.
