32
6 Set up with the display and adjustment module
VEGAPULS 65 • Foundation Fieldbus
36518-EN-140209
–
Higher measurement speed through lower averaging
–
Sporadic false echoes are suppressed
Dosing vessel:
•
Setup: all vessel sizes possible
•
Product speed:
–
Fast filling and emptying
–
Vessel is very often filled and emptied
•
Vessel: narrow installation situation
•
Process/measurement conditions:
–
Condensation, buildup on the antenna
–
Foam generation
•
Properties, sensor:
–
Measurement speed optimized by virtually no averaging
–
Sporadic false echoes are suppressed
–
False signal suppression recommended
Standpipe:
•
Product speed: very fast filling and emptying
•
Vessel:
–
Vent hole
–
Joins like flanges, weld joints
–
Shifting of the running time in the tube
•
Process/measurement conditions:
–
Condensation
–
Buildup
•
Properties, sensor:
–
Measurement speed optimized through little averaging
–
Entering the tube inside diameter takes the running time shift
into consideration
–
Echo detection sensitivity reduced
Bypass:
•
Product speed:
–
Fast up to slow filling with short up to long bypass tube possible
–
Often the level is hold via a control facility
•
Vessel:
–
Lateral outlets and inlets
–
Joins like flanges, weld joints
–
Shifting of the running time in the tube
•
Process/measurement conditions:
–
Condensation
–
Buildup
–
Separation of oil and water possible
–
Overfilling into the antenna possible
•
Properties, sensor:
–
Measurement speed optimized through little averaging
–
Entering the tube inside diameter takes the running time shift
into consideration
–
Echo detection sensitivity reduced
–
False signal suppression recommended
