Vega VEGAFLEX FX-E.80H, Operating Instructions Manual

Page: 5 / 20

5
3 Product description
Electronics module • VEGAFLEX 80 series
43656-EN-170531
3 Product description
3.1 Configuration
This operating instructions manual applies to electronics modules
with the following hardware and software versions:
•
Hardware from 1.0.0
•
Software from 1.1.0
The scope of delivery encompasses:
•
Electronics module
•
Documentation
– This operating instructions manual
– Ex-specific " Safety instructions " (with Ex versions)
– If necessary, further certificates
3.2 Principle of operation
The electronics module is suitable for exchange in sensors of the
VEGAFLEX 80 series. You can find information of the available ver-
sions in chapter " Mounting preparations ".
3.3 Packaging, transport and storage
Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
based on ISO 4180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE
foil is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out in due consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or con-
cealed defects must be appropriately dealt with.
Up to the time of installation, the packages must be left closed and
stored according to the orientation and storage markings on the
outside.
Unless otherwise indicated, the packages must be stored only under
the following conditions:
•
Not in the open
•
Dry and dust free
•
Not exposed to corrosive media
•
Protected against solar radiation
•
Avoiding mechanical shock and vibration
Scope of this operating
instructions manual
Scope of delivery
Application area
Packaging
Transport
Transport inspection
Storage