19
5 Connecting to power supply
VEGACAP 67 • Two-wire
31317-EN-200929
4
1
2
3
Fig. 10: Electronics and connection compartment
1 DIL switch for measuring range selection
2 Ground terminal
3 Connection terminals
4 Control lamp
For connection to a controller. The sensor is powered by the con-
nected controller. Further information is available in chapter "
Techni-
cal data
", "
Ex-technical data
" are available in the "
Safety information
".
The wiring example is applicable for all suitable controllers.
Take note of the operating instructions manual of the controller. Suit-
able controllers are listed in chapter "
Technical data
".
1
Fig. 11: Wiring plan
1 Voltage supply
Electronics and connec-
tion compartment
Wiring plan
