48
9 Diagnostics and service
VEGABAR 81 • 4
… 20 mA
45025-EN-140228
1
2
3
6
4
5
Fig. 27: VEGABAR 81 in IP 68 version, 25 bar and lateral cable outlet, external
housing
1 Process assembly
2 Plug connector
3 Fixing screw
4 Cable assembly
5 Connection cable
6 External housing
3. Loosen the plug connector
4.
Mount the new process assembly on the measuring point
5.
Plug the connector back in
6.
Mount the cable assembly on the process assembly and turn it to
the desired position
7. Tighten the fixing screw with the hexagon key wrench
The exchange is finished.
If there is no replacement part available on site, one can be ordered
from the agency serving you.
The necessary serial number can be found on the type label of the
instrument or on the delivery note.
9.5 Software update
The following components are required to update the instrument
software:
•
Instrument
•
Voltage supply
•
Interface adapter VEGACONNECT
•
PC with PACTware
•
Current instrument software as file
You can find the actual instrument software as well as detailed
information of the procedure under "www.vega.com/downloads" and
"
Software
".