37
7 Set up with the integrated display and adjustment unit
VEGABAR 39 • Three-wire 1 x transistor or 4 … 20 mA
57536-EN-200831
In this menu item you safeguard the sensor parameters by entering
a 6-digit device code against unauthorized or unintentional modifica-
tions.
With protected parameter adjustment, the individual menu items can
be selected and displayed, however the parameters can no longer be
modified.
The sensor operation can also be enabled in any menu item by enter-
ing the device code. The parameter adjustment remains open until
you return to the measured value display. This takes place automati-
cally after 60 min.
Menu item code:
•
COD
Parameter:
•
Numerical value
Note:
The factory set device code is "
000000
". If this is changed by the user
and is no longer available, access is only possible via the emergency
device unlock code on the information sheet "
Emergency unlock
codes
" also supplied.
Note:
With protected parameter adjustment, adjustment via the VEGA Tools
app as well as PACTware/DTM and other systems is also blocked.
During a reset, parameter settings made by the user are reset to the
values of the basic setting or the delivery status (see chapter "
Menu
overview
")
4)
.
Menu item code:
•
RES
Parameter:
•
Basic settings
Protection of the param-
eterization
Reset
4)
Language and Bluetooth access code are not reset.
