Vega TS-11, User Manual

Page: 16 / 29

Vega TS-11 / User Manual
14
Revision 02 - 27.12.2017
Parameters of the latest packet transmitted by tester – to the left of the title bar there is
information is displayed from top to bottom in order:
 COUNT – total number of ‘Uplink’ packets transmitted by the tester;

UM – demodulation margin of the latest transmitted ‘Uplink’ packet;

P – power of network tester transmitter;

SF – Spread factor – the latest ‘Uplink’ packet transmitting rate indicator;
 FQ – frequency on which the latest ‘Uplink’ packet transmits.
Parameters of the latest packet received by tester – to the right of the title bar there is
information is displayed from top to bottom in order:

COUNT – total number of ‘Downlink’ packets received by the tester;
 DM – demodulation margin of the latest transmitted ‘Downlink’ packet;
 RSSI – the latest ‘Downlink’ packet power expressed as dBm;

SF - Spread factor – the latest ‘Downlink’ packet transmitting rate indicator;

FQ - frequency on which the latest ‘Downlink’ packet transmits.
‘Hourglass’ icon – automatic test mode indicator is located in the upper right corner of
the screen. If it is, automatic test mode is on, if not - off.
Battery charge – displays the current battery charge status. When the battery is critically
discharged, the icon becomes empty, flashes, and the tester emits a periodic beep. The
approximate remaining time of operation is not more than 5 minutes, it is necessary to
charge
the battery .
Receiving window № - in the first or second window the latest ‘Downlink’ packet was
received.