Vega OPR521-N-TS, Manual

Page: 15 / 24

6.2. DISP801
When you are not in the programming menu, on the home screen of the keypad you can check the status of the
door, the current error and the active inputs:
A
ALARM
ENC-INC
S
2
1
4
3
POSITION ON THE
KEYPAD
MESSAGE
DISPLAYED
DESCRIPTION
1
(INPUTS)
A [OPEN] input active
C [CLOSE] input active
N [NUDGE] input active
P [FTC] input active
2
(STATUS)
ALARM Error in progress
REPHASING Synchronization in closure at power-on
LEARNING Learning stroke in opening
WAITING Door halted, waiting for a command
RUNNING Moving door
DOOR CLOSED Door fully closed. [CLOSED] relay active
DOOR OPEN Door fully open. [OPENED] relay active
OBSTRUCTION Mechanical obstacle. [OBSTR.] relay active
3
(ALARMS/ENCODER)
Enc: xxxxx Encoder position in impulses
IxT-PROT High current for 7 seconds
ENC-KO Encoder error
OVERTEMP Motor thermal protection
OVER-CURR Overcurrent
BARR-KO Light curtains error
UND-VOLT Power supply voltage is too low
ENC-INC
Incoherent Encoder.
Repeat the learning procedure.
NVM-ERR External EEPROM error
4
(SD-CARD)
S SD card detected
Ǝ SD card reading error
# Automatic runs function enabled