Vega DSGH, Quick Reference Manual

Page: 18 / 28

Maintenance and Diagnostics
Sensor Voltage
Status - Pass/Fail
Sensor high voltage fail/High voltage
on PMT is outside usable range.
Contact VEGA Field Service.
Standardize Due -
No/Yes
Standardize Due Perform a new standardization
procedure.
Shutter Check Due
- No/Yes
Shutter Check Due Perform shutter check. Acknowledge
on Source Functions tab.
New Hardware
Found - No/Yes
New hardware found?/CPU board
detects configuration mismatch. CPU
board or sensor assembly may have
been replaced or one of EEPROM
configurations is incorrect.
Contact VEGA Field Service first. If
they concur, click Diagnostics , New
Hardware , No New Hardware and
click OK .
Process Out of
Range - No/Yes
Process out of measurement
range/Current process value is not
within limits set by Max level and Min
level in gauge span settings.
Contact VEGA Field Service.
X-Ray Alarm -
No/Yes
Note that there are high levels of x-ray
radiation in area that can affect
process measurement.
Contact VEGA for more information.
18