Vega Technologies CP-03, Instruction Manual, Page: 10 / 13

R404-1
11. Press “MODE” at the starting air pressure setting mode, the device enters
the compliance time checking mode. The LCD displays “Compliance
Hrs xxxx.x”, xxxx.x is the compliance time of the device. This value is not
to be changed, but only to be reset. Press “+” + “-” for a period of time of
2 seconds to reset it.
12. Press “MODE” at the compliance time checking mode, the device enters
the operation time checking mode. The LCD displays “Operation Hrs
xxxx.x”, xxxx.x is the operation time of the device. This value is not to be
changed, but only to be reset. Press “+” + “-” for a period of time of 2
seconds to reset it.
13. Press “MODE” at the operation time checking mode, the device enters the
total operation time checking mode. The LCD displays “Unit Hrs xxxx.x”,
xxxx.x is the total operation time of the device after leaving factory. This
value is not to be changed, but only to be reset. Press “+” “-” “+” “-” “+” “-”
within 2 seconds to reset it. (This combination should not appear in the
user’s manual)