Smart-HS0101 / User Manual
24
Revision
№ 01 - 01 February 2019
“SMART-HS0101” TAB
The “Smart-HS0101” tab contains the settings of the connected device.
Current state
– displays the current parameters measurement by the device - the
temperature, humidity, vertical tint angle, the battery level and two Hall sensors state.
Data transmission settings
– a group of parameters that allows you to configure the
collection and transmission periods, and the time zone for the internal clock of the counter will
be set which.
When temperature/humidity values come out of range then transmission period remains
unchanged except the case of “Send alarm when data out of thresholds” parameter is active
(see below).
The readings stored in the device memory at 00.00 on the internal clock of the device if
the data collection period is set to 24 hours, at 00.00 and at 12.00, if the period is 12 hours and
so on. All readings are stored in the device memory until the next communication session will