Vega SH-2 / User Manual
28
Revision 06 – 06 July 2020
MESSAGE FORMAT FOR MQTT BROKER SENDING
If the LTE technology used for data transmitting, then the data transmits via MQTT
protocol. You should specify in the device settings the address and port of the server where
the data will be sent. Those settings specified in application. It must be MQTT broker as a
server (received side). You should specify in the device settings the address and port of the
broker. Also, you should specify a topic name where the data published and a client name –
the name which the device use for publishing. All those settings specified in “Vega LoRaWAN
Configurator” in part “MQTT over LTE settings”. For watching the data sending by the device
you should deploy MQTT broker on a PC and subscribe some application on MQTT broker.
Vega SH-02 sends the message on the server as a text of JSON format. See example
below.
{
"Message":{
"firmware":"SH-02 v0.1.4",
"num":1,
"date":"1.3.19",
"time":"8:43:27"
},
"LBS":{
"TAC":"9C8D",
"CID":"0856831D",
"ACT":"9",
"MCC":"250",
"MNC":"99",
"SQ":"21"
},
"CellStatus":{
"EARFCN":1240,
"PCID":354,
"RSRP":-775,
"RSRQ":-108,
"RSSI":-716,
"SNR":247
},
"Telemetry":{
"reason":"time",
"date":"1.1.17",
"time":"0:0:5",
"bat":99,
"pulse1":0,
"pulse2":0,
"ADC1":8,
"ADC2":8,