VeEX VEPAL CX350S-D3.1 User Manual Download Page 96

Page: 96 / 114

Bluetooth Adaptors - Compatibility

Not all Bluetooth adaptors on the market are supported by the V300 product series. Please use

adaptors that have been tested and supplied by VeEX only to ensure compatibility and correct

operation.

Go back to top

Go back to TOC

Bluetooth Setup

Insert the Bluetooth adaptor into the USB port on the side of unit. If you are using more than one USB device, use an external

USB hub to connect additional devices. Once detected, a

Bluetooth

icon

is displayed on screen.

Devices

The test platform will automatically detect the Bluetooth adaptor once plugged into the USB port. Details of the Bluetooth adaptor

will be displayed including the MAC address of the device and the last 4 digits of the serial # of the V300 test set. The last 4

digits of the V300 series test set will be the pairing code between the unit and the external device. Press the

Connection

tab to

view the passcode.

Bluetooth - Devices Tab

CX350s-D3.1 e-Manual D07-00-102P RevA01

Page 91 of 109

Summary of Contents for VEPAL CX350S-D3.1



















































































































Search results

Summary of Contents for VEPAL CX350S-D3.1

Reviews:

Related manuals for VEPAL CX350S-D3.1

Brands by name

Popular brands

VeEX VEPAL CX350S-D3.1, User Manual

Search results

Summary of Contents for VEPAL CX350S-D3.1

Reviews:

Related manuals for VEPAL CX350S-D3.1

Brands by name

Popular brands