VeEX VEPAL CX350S-D3.1 User Manual Download Page 81

Page: 81 / 114

Analyze:

This soft button opens a more detailed analysis and report generation. Use the check boxes to select the images to be

analyzed

Image File:

shows the name of the picture currently being displayed. Use the Open button to navigate, select and load any

other file.

Show/Hide Overlay:

Enables or disables the mask, anomalies identification and analysis.

Finer From/To:

User customizable labels to identify the fiber under test

Save Report:

Generates a full report including a table with measurements and images. Use the >Utilities >Files function to

View the report, export to PDF format and copy to USB.

CX350s-D3.1 e-Manual D07-00-102P RevA01

Page 76 of 109

Summary of Contents for VEPAL CX350S-D3.1



















































































































Search results

Summary of Contents for VEPAL CX350S-D3.1

Reviews:

Related manuals for VEPAL CX350S-D3.1

Brands by name

Popular brands

VeEX VEPAL CX350S-D3.1, User Manual

Search results

Summary of Contents for VEPAL CX350S-D3.1

Reviews:

Related manuals for VEPAL CX350S-D3.1

Brands by name

Popular brands