VeEX OTDR FX150+ Series, User Manual

Page: 43 / 109

OTDR Series e-Manual, D07-00- 076P -RevD00 Page 43 of 109
The details entered in the following fields can be used to pre-set the filename automatically.
and increment fiber or test number automatically.
•
Job ID, Cable ID, Fiber ID, Test ID (content in this field automatically added to
filename)
• Increment : Choose to increment by Fiber ID or Test ID (can be used to increment fiber
count).
Fiber Scope Setup page 2
•
Analysis parameters: Enter any name to identify the cable, site, technician, job, etc.
•
Tip type: Select the type of tip used on the Fiber Scope. General is the default type.
LC/APC and E2000/APC should not use general tip type.
•
Auto center/Crop: Check this to center and crop the image automatically. Ideal for
APC images.