VeEX OTDR FX150+ Series, User Manual

Page: 78 / 109

OTDR Series e-Manual, D07-00- 076P -RevD00 Page 78 of 109
7.3 Autosave Parameters (OTDR Setup page 3 and 4)
OTDR Setup page 3: Autosave
•
Auto Save : Select Disabled, Enabled, Report or V-Scout Report
• Ask Before Save : Check this if you want to be prompted to save after measurement is
completed
The following information can be pre-set to create a name and increment fiber or trace number
automatically (
Page 3
). The filename will begin with the Index value, Trace ID, Wavelength,
Pulse Width, and S/N, if checked.
•
Increment : Choose to increment Fiber ID or Trace ID
•
Job ID
•
Cable ID
• Fiber ID - Check Add Index if you wish to auto-increment or Check Add Date/Time
• Add Index (Fiber) : Test counter. When saving test results, count auto increments and
is added to filename. Forces value or reset counter for Fiber Index.
•
Trace ID - Check Add Index if you wish to auto-increment or Check Add Date/Time
The filename will include details entered in this field automatically. The fiber count can
be incremented in Trace ID or Fiber ID.
• Add Index (Trace) : Forces value or resets counter for Trace Index.
•
Wavelength
: Include test wavelength used for each trace
•
Pulse Width
: Include pulse width used for test
•
S/N : Include tester serial number