6.8 Fiberscope Platform Application
All fiberscope software options (Fiberizer Scope Expert Image View and Fiber Scope Auto Freeze and IEC Pass/Fail Analysis)
for the DI-1000, DI-1000 MPO, and DI-3000 are enabled by default (free license).
6.8.1 Connecting the Fiberscope
1. Connect the Fiberscope to the test set, using any available USB port (older analog fiberscopes require a USB adapter). When
the DI-1000, DI-1000MPO, or DI-3000 fiberscopes are plugged into a USB, they will emit a blue LED.
2. If not automatically connected, select the
Utilities
or button on the top-left corner of the screen.
3. Tap the
Tools
menu item, and then tap
Advanced
.
4. Select the
Fiber Scope
option.
The OTDR Viewer application is used solely with the VeEX OPX-BOXe/OPX-BOX+ OTDR platform. This extends the capabilities
of the VeEX test set as a post-market add-on option for fiber optics testing. The Optical Power Meter application (in Fiber Tools)
works with a tethered FX4x/FX8x OPM/OLTS meter as an add-on fiber optics testing capability.
Fiberscope, located in Tools > Advanced menu
Fiberscope Operation
After connecting and powering on, use the following operations in analysis mode to inspect the fiber connector:
DI-1000:
rotate the top dial/knob to manually focus/defocus the image to clear view.
DI-1000MPO:
manipulate the X, Y, and Z control knobs, respectively to shift to the next fiber (right to left, using the key-up
and key-down adapter), row, and proper manual focus.
DI-3000:
press the autofocus button when the endface is out-of-focus and centered as best as possible. A clear endface
image is obtained within a couple of seconds. Manual focus is performed on nearly focused images or MPO connectors.
The DI-1000, DI-1000 MPO, DI-3000 also includes a freeze/unfreeze button located on the lower side of the probe.
MTTplus-420_User_Manual_RevC00
Page 25 of 75
