6.8.3 FiberScope Analyzer - Page 2
Fiberscope Setup menu - page 2 (Analyze connector profile selections)
To begin analyzing fiber connectors:
1. Select the analysis profile from the
Analysis parameters
drop-down box on
Page 2/2
of the
Setup
tab. The analysis profile
is based on the fiber endface connector inspected, as well as applicable to MTP™/MPO (multi-fiber) connectors.
PC, SM RL
≥
45 dB
: UPC connector
PC, SM RL
≥
26 dB
: PC connector (used with LC/MU)
APC, SM
: APC connector
PC, MM
: Multi-mode connector
2. Select the
Tip Type
from the drop-down box.
General
: Encompasses standard SC, FC, ST, and other 2.5 mm ferrules.
LC
: Lucent connector (male). Encompasses 1.25 mm ferrules (LC/MU)
LC female
: Lucent connector (adapter). Encompasses 1.25 mm ferrules (LC/MU)
E2000™
: a proprietary family of connectors invented by Diamond SA known for its low insertion loss characteristics
and built-in (latched) shutter.
3. Select the
Auto center/Crop
checkbox to take the current video frame and center it by the detected fiber image inside the
program window, i.e. in case of long (extension) tips or handshaking Initially, the a blank screen will display.
4. Select the
Capture
tab.
MTTplus-420_User_Manual_RevC00
Page 27 of 75
