VeEX MPA, User Manual

Page: 53 / 842

Getting Started
53
•
Stop
•
Restart
•
Presets
•
Report
•
Test Setup
•
Clear History
•
Lock Screen
•
Shut Down
Error Insert
The Error Insert common function button is used to injects single errors into the
transmitted protocol processor signal:
If no error types are specified for the Error to Insert setting in the Transmit > Error /
Alarm screen, then a Select Error to Insert menu will appear when the Error Insert
button is first pressed, allowing the user to specify which error type to insert.
The Error Insert button then causes single error insertions of the selected Error Type
each time the button is pressed.
Stopping a Test
The Stop common function button stops the reporting of received data and takes a
snapshot of error, alarm, and event activity.
When the Stop button is selected, the following occurs:
•
All statistics logged and reported by the Performance Monitoring function stop.
•
All alarm, error, and event statistics logged and reported by the Results function
stop.
•
All elapsed time and duration counters stop.
The LEDs will continue to update and indicate current activity.
To stop a test:
MPA_e_manual_D07-00-129P_RevA00