CONNECTION AND SETUP
7
3) Signal Transmission Examination
When the DVR is powered on, right-click to display the main menu, and select
“ADVANCED CONFIG”
“DCCS”.
ADVANCED CONFIG
CANERA
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 CH10 CH11
W
X
DETECTION
DIAGNOSTIC START
ALERT
MENU SETUP
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
DEVICE AVK523
IVS
CONNECTION OK
NOTIFY
EXIT
a) Make sure the model number of your DCCS camera is shown in “DEVICE”. If
not, please check your camera connection.
b) Select the channel which connects to your DCCS camera, and click “START” in
“DIAGNOSTIC” to examine the signal transmission between the DCCS camera
and the DVR.
2.2.3 PTZ Camera Connection
The following description is taking our brand’s PTZ camera as an example.
For DVR setting to control the PTZ camera, please refer to “5.5 PTZ Camera Setting” at
page 25. For detailed PTZ camera control and operation, please refer to its own user
manual.
RJ11 cable
RS485-A:
Red wire
RS485-B:
Green wire
The RJ11 cable is not supplied in the sales package.
Summary of Contents for MDR688D
Page 51: ...REMOTE OPERATION 46 ...
