Introduction
This manual describes site preparation and installation procedures for the Veeder-Root TLS RF Wireless 2 System
(W2) for Vapor Recovery monitoring. The TLS RF Wireless 2 System (W2) features two-way communication
utilizing a client/server architecture resulting in improved data collection.
Veeder-Root strongly recommends the use of hard wiring for connecting Veeder-Root sensors to the TLS Console.
Wired connections provide a robust communication link that is far superior to wireless networks.
A wide variety of devices can be integrated into the TLS RF Wireless 2 System (W2) network depending on the
console(s) installed as shown in Table 1. Wireless component kit part numbers are shown in Table 2.
Procedures Contained Within This Manual
• Mounting the TLS RF and connecting power wiring.
• Installing Receiver, Repeater and Transmitters.
Table 1. Wireless 2 Devices Per TLS Console
Consoles
Wireless Device
Total Number of
Wireless Devices
per TLS console
Vapor
Flow
Meter
Carbon
Canister
Vapor Pol-
isher
8470
TLS-350
Console
32
8482
TLS-350R
Console
Up to 32
1
32
Table 2. Wireless Component Kit Numbers
V-R Kit Order
Number
V-R Component Number
RF Console
332242-002
Transmitter
332235-016
Repeater
332440-030
Receiver
332440-029
Battery Pack
332425-011
Enclosure
330020-716
858090-203
X
X
X
858090-204
X
X
X
858090-205
X
X
330020-716
X
330020-668
X
330020-674
X
330020-670
X
330020-669
X
330020-718
X
19-1
ARB Approved IOM 19 - TLS RF Wireless 2 System (W2) Installation and Maintenance Guide - Executive Order VR-203 and VR-204
