TLS RF Installation
Wiring the TLS RF
Figure 11. Wiring Data Outputs from TLS RF to TLS Console
LEGEND FOR NUMBERED BOXES IN Figure 11
Note: Output wiring from the TLS RF to the TLS console is an intrin-
sically safe circuit.
NOTE: Intrinsically safe wiring shall be installed in accordance with
Article 504-20 of the NEC, ANSI/NFPA 70.
1.
Received Transmitter data output terminals (1-8).
2.
In this example, device output 1 is a CCVP transmitter -
Observe polarity. Note: each time a transmission is received
from this device, LED 1 (see item 5 in Figure 12) will flash.
3.
In this example, device output 2 is a Flow Meter - Observe
polarity. Note: each time a transmission is received from this
device, LED 2 (see item 5 in Figure 12) will flash.
4.
1/2” i.p.s. conduit to TLS console
5.
SmartSensor interface module in TLS console
6.
Intrinsically-safe side
7.
Power side
SMART
SENSOR
MAXIMUM
OUTPUT RATINGS
13 VDC
0.2 AMP
+
+
+
+
+
+
+
+
1
2
3
4
5
6
7
8
SMART SENSOR INTERFACE MODULE
AB
CDE
F
0
12
3
456
7
8
PROBE
8
PR OBE 7
PROBE 6
PROBE 5
PROBE 4
PROBE
3
PROBE 2
PROBE 1
+
G
15V
G
AC
INPUT
REPEATER
R
S
-4
8
5
964-10c
a
.ep
s
2
6
7
4
3
15V
5
1
19-17
ARB Approved IOM 19 - TLS RF Wireless 2 System (W2) Installation and Maintenance Guide - Executive Order VR-203 and VR-204
