Vectronic Aerospace VERTEX Lite Collar, User Manual, Page: 38 / 87

Direct Collar Communication 38
© 2017 VECTRONIC Aerospace GmbH
5.3.2 Configuration
Devices Remote Stick VERTEX Lite Configuration
Devices USB Bluetooth Stick VERTEX Lite Configuration
In the Configuration node you can change all user-definable configurations of your collar.
Figure 25: Configuration node
Please refer to following subtopics of the Configuration Node:
User Configuration
Setting the time
Firmware Upload
5.3.2.1 User Configuration
Devices Remote Stick VERTEX Lite Configuration User
Configuration
Devices USB Bluetooth Stick VERTEX Lite Configuration
User Configuration
In this frame you can change the user-definable configurations. The actual configurations
can be seen in the collar's
Telemetry and Info File . Faulty entries (e.g. faulty UTC
correction) will automatically be reset back to the factory settings defined by
VECTRONIC Aerospace.
When configuring different settings, a small window will appear whenever marking a
parameter you like to change. In this window, you will get the information which values
you can put there (Min value and Max value). This window appears in the User