Vectronic Aerospace VERTEX Lite Collar, User Manual

Page: 34 / 87

Direct Collar Communication 34
© 2017 VECTRONIC Aerospace GmbH
Globalstar
shows the Globalstar Mode, the amount of Globalstar attempts
and the ESN number
Iridium shows the Fixes per Message (user-definable) and IMEI number
of the collar (potentially needed in collar registration)
GSM mode, destination number, and the reception delay which
defines the delay until the GSM modem starts to send data
Beacon:
Beacon Frequency
shows the frequency of the VHF beacon: the Default Frequency
which was set by VECTRONIC Aerospace and the User defined
Frequency. Furthermore, the values of the Beacon Min
Frequency and the Beacon Max Frequency are shown which
define in what range you are able to alter the VHF frequency
Beacon Power shows the VHF Beacon output Power.
Patterns
shows information about the Standard Pattern as well as the
Mortality Pattern and the Low Battery Pattern of the VHF
beacon. The patterns include the Default Pattern which was set
by VECTRONIC Aerospace and the User Pattern if it is
configured. For the Low Battery Pattern you can define 'Start
Time', 'Cycle Period' and 'On Duration'.
Sensor Communication:
Repetition Interval defines how often the collar transmits its UHF ID
Proximity Transmitter shows if its on / off, transmit frequency, and transmit power
5.3.1.2 GPS Monitor
Devices Remote Stick VERTEX Lite Information GPS
Monitor
Devices USB Bluetooth Stick VERTEX Lite Information
GPS Monitor
The GPS monitor function allows to check the GPS receiver. There are two options in
this frame, GPS Warmstart and a GPS Coldstart.
Both commands should only be used
for diagnostics and outside of buildings with open view to the sky.