Direct Collar Communication
43
© 2017 VECTRONIC Aerospace GmbH
Figure 28: Set Time Frame
5.3.2.3 Firmware Upload
Devices
Remote Stick
VERTEX Lite
Configuration
Firmware Upload
Devices
USB Bluetooth Stick
VERTEX Lite
Configuration
Firmware Upload
A Firmware update is only necessary if you experience problems with the current collar
firmware or need a feature only available in a newer version than the present one. In this
case, get the appropriate file from VECTRONIC Aerospace. Select the update (.bin) file
with
. Afterwards, you can see that some information appears in the window. You
can check information on Device Model, File Type, Version (the firmware version you
are going to upload to the collar) and the Version Attributes. Send the upgrade to the
collar with
. The upload will be verified automatically while it is progressing.
Summary of Contents for VERTEX Lite Collar
