Vectronic Aerospace VERTEX Lite Collar, User Manual

Page: 42 / 87

Direct Collar Communication 42
© 2017 VECTRONIC Aerospace GmbH
After you have provided your changes in the configuration, you can choose if you like to
send the new configuration only to the selected collar or to any collar by setting up the
Destination on the left side of the frame. Press to send the settings to the
specific collars. Press to reload the configuration from the actual chosen
collar. Pressing the button , all settings in the collar except the
schedules are deleted. Afterwards, the default settings defined by VECTRONIC
Aerospace are applied.
5.3.2.2 Setting the time
Devices Remote Stick VERTEX Lite Configuration Time
Devices USB Bluetooth Stick VERTEX Lite Configuration
Time
To set the time in the collar, make sure that the USB Device is attached to your PC, click
on the Time frame in the Configuration node, attach the magnet to your collar within 10
seconds and detach the magnet from the collar.
Two times are displayed, the Current Collar Time [UTC] and the PC Time. The frame
also displays the Computer UTC Correction. The New Collar Time [UTC] is by default
given as the PC Time calculated from the PC UTC correction and the PC’s current time.
If there are differences between PC time and the time you want to set in the collar, use
the up- and down arrows and the calendar function or type in the new time. After you
have provided your changes in the time, you can choose if you like to send the new
configuration only to the selected collar or to all collars found in the Device Search by
setting up the Destination on the left side of the frame. Press to send the
new time to the collar / to the collars. With you can reload the configuration
from the collar.
NOTE: With each successful GPS fix, the collar time is automatically adjusted to the
correct UTC time. UTC correction will be only applied for schedules and time of the day
settings. Also, UTC correction cannot be enabled by sending the local mean time to the
collar.