VECTRIX ZEV OWNER’S MANUAL
35
The Vectrix must be in an upright position to check
the beam setting. Make sure the tires are at the
proper inflation. Have one person sit on the Vectrix.
Place the Vectrix opposite a wall, about 10 meters
away. Draw a horizontal line dictated by the headlight
center and a vertical line in line with the Vectrix axis.
It is better to perform this test in dim light. Switch on
the low beam. The height of the light spot should not
exceed 9/10 of the height from ground to headlight
center.
COrreCTinG The liGhT BeaM
The Vectrix main/dipped beam has been precisely
set at the factory. Please contact your authorized
Vectrix dealer if resetting is required.
BEaM sETTing