34
VECTRIX ZEV OWNER’S MANUAL
heaDliGhT
To replace the headlight bulb, you will need to work
behind the headlight fairing. Remove the connector
from the bulb. Pull the tab to remove the protective cap.
Release the clip that holds the bulb in place and take the
bulb out of the socket. The headlight is a dual filament 2
X 35 watt Phillips HSR-1.
leD liGhTinG SYSTeM
Due to the extremely long life of the LED lighting
system, individual LED replacement is not expected.
If a turn signal, stop/tail light, license plate light or
trunk light fails, it is necessary to replace the entire
lighting module which has failed.
BulB rEPlacEMEnT
Warning!
Do not change bulbs immediately after running
your Vectrix. Let the lights cool off. Bulbs become
hot when the Vectrix is running and need proper
time to cool off. Hot bulbs can cause severe burns
if handled.
noTE!
Always hold the new bulb from the base. Oil from
human hands can cause the bulb to turn black and
become less brilliant.