VECTRA H1 Tethered Capture
Q U I C K R E F E R E N C E G U I D E
9
4. Stitching
if auto-stitch fails
If VECTRA software is unable to locate the required
facial features, it will display an error message over the
captured images.
First check to see whether all three images were taken
in the specified order: right, front, left. If not, click
discard & retake
and capture the images in the
correct order.
If the order is correct, check to see whether the poses
are correct, eyes are open and mouth is closed for all
three images. If not, click
discard & retake
and
recapture the images.
If images appear to be properly captured, click
OK
in
the error message to manually identify the landmarks.
1
The location for the first landmark is displayed in
the icon below the first image. Position the tip of the
cursor arrow over the appropriate anatomical location
in the first image as shown, and click once to place the
landmark. As each location is clicked, the icon updates
to highlight the next landmark to be placed. Each of
the 3 captures requires its own set of landmarks.
