Capturing Images with H1 Tethered to Computer
10
VECTRA H1 Tethered Capture
Q U I C K R E F E R E N C E G U I D E
2
Repeat until each of the requested landmarks has
been placed. If you wish to change the position of a
landmark, position the tip of the cursor arrow over it.
The cursor changes to an
open hand when it’s close
enough to the landmark. Click and drag (the cursor
changes to a
grabbing hand). Release the mouse
button when the landmark is in the correct position.
3
When you are satisfied with the manual landmarks,
click
retry stitch
. VECTRA software completes the
automatic stitching process and displays the completed
image in Face Sculptor.
