Vectra Genisys® Therapy System
134
OPTiON OPErATiON
1 .
Remote Storage Hook
2 .
Treatment Pause button
3 .
Channel 2 Increase Intensity button
4 .
Channel 2 Decrease Intensity button
5 .
Manual Stimulation button
6 .
Channel 1 Decrease Intensity button
7 .
Channel 1 Increase Intensity button
NOTE:
Refer to
page 16
for Symbol
definitions .
Install the Operator Remote as described
on
page 130
. Set up electrotherapy session
as described on
pages 44-46
.
Start electrotherapy session by pressing the
Start Treatment Button .
1
2*
3
4
6
5
7
* bluE fOr channElS 1/2 OPEraTOr rEMOTE
OranGE fOr channElS 3/4 OPEraTOr rEMOTE
OPErATOr rEMOTE OPErATiON
STarT
TrEaTMEnT
buTTOn
Pause session by pressing the Pause Button
on the Remote being used .
Press the M Button on the remote to apply
Manual Stimulation . Release the M Button to
stop Manual Stimulation application .
STOP
TrEaTMEnT
buTTOn
Verify each Operator Remote is
connected to the applicable jack for the
channels being used .
Operator Remote is to be used under
supervision of a physician or licensed
practitioner only .
The Operator Remote is not intended for
patient use .
Increase or decrease the intensity by pressing
the Up or Down Button on the Operator
Remote for the respective channel being
used . This can be done while Manual
Stimulation is being applied .
To Stop session, press the Stop Treatment
Button .
Nomenclature
Operation
