X2-O
PERATIONS
M
ANUAL
B
UTTON
D
ISPLAY
Doc: 70-00-0950A, Serie X2, 20211220
© Vector Controls GmbH, Schweiz
Page 9-16
Subjects to alteration
www.vectorcontrols.com
V
ECTOR
5.3
Set Time Schedules
Overview
Up to 12 time and weekday programs or annual holidays can be programmed (Pr01 to Pr12).
5.3.1
Time schedule enable/disable
Overview
This section describes how to generally enable/disable timed events (schedules) on a X2 device.
Procedure
1.
Press the ( /
) button longer than 2 seconds.
➔
SEL
and the actual
Date
and
Time
are displayed alternatingly.
2.
Press the ( ) button briefly to go to the scheduler submenu.
➔
PRO
and
SEL
is displayed.
3.
Press the ( /
) button: Schedule status indicates whether it is
OFF
or
ON
.
Press the ( /
) button to change the status.
➔
When schedule is ON,
is displayed.
Press the ( ) button (1x) to go back to the previous submenu.
5.3.2
Set weekly time schedules
Overview
This section describes how to set a daily, weekly repeated action/function.
Up to 12 time and weekday programs can be programmed (Pr01 to Pr12).
Requirements
Time schedule is enabled (see chapter 5.3.1).
Procedure
1.
Press the ( /
) button longer than 2 seconds.
➔
SEL
and the actual
Date
and
Time
are displayed alternatingly.
2.
Press the ( ) button briefly to go to the scheduler submenu.
➔
PRO
and
SEL
is displayed.
3.
Press the ( /
) button: Schedule status indicates whether it is
OFF
or
ON
.
4.
Press the ( /
) button to change the status.
➔
When scheduler is ON,
is displayed.
5.
Press the ( ) or ( ) button to select between programs
Pr 01
…
Pr 12.
