background image

5

1.

INTRODUCTION

This product has a sealed lead acid battery that should be kept at full charge.  Recharge before

first use, immediately after each use, and every six months if not used.  Failure to do this may

reduce the battery life dramatically.

Congratulations!  You have just purchased one of the finest Jump-Starter and 12 volt DC Systems

(VEC010S) on the market today.  We have taken numerous steps in quality control and in

manufacturing processes to ensure that your product arrives in top condition and that it will

perform to your satisfaction.

In the rare event that your portable power source contains a damaged or missing item, does not

perform as specified, or requires warranty service, please call our Technical Support Toll Free

(866) 584-5504.  Our technical service representative will expedite delivery of your part.  If your

product needs warranty service, our technical service representative will help you obtain the

fastest remedy possible under the warranty.  Save your purchase receipt, it is required for

warranty service.

The Start-it® Compact Elite™ is designed to be the ideal work, emergency and recreation power

source by powering DC appliances on the road, at the beach or wherever your travels take you.

It can also be used with other Vector 12 volt DC cordless, portable, rechargeable appliances rated

at 12 amps maximum.  For information about Vector appliances, contact Vector Manufacturing,

Ltd. at (866) 584-5504.

1.1 FEATURES

Battery Charge Status

A series of (3) LED’s are arranged (2 red and 1 green) to display the level of charge (low to full)

in the battery. The left most RED LED indicates minimum battery charge.  Charge the battery when

only a single LED is lit.  The “center” LED (RED) indicates moderate battery charge level. When

the GREEN LED is lit, the battery is at “full charge.”  The “charge status” LED’s will light when the

charge status button switch is pressed, or automatically during AC recharge operation.  During

DC charging, the button switch can be pressed periodically to monitor the recharging progress.

12 Volt DC Accessory Outlet

This accessory outlet is provided for use with appliances that are compatible.  The DC accessory

outlet also allows for DC recharging from a vehicle or other 12 volt source.

12 VOLT DC
ACCESSORY
OUTLET

AC

RECHARGING

PORT

BATTERY CHARGE

LEVEL INDICATORS

KEYLESS ON/OFF
SAFETY POWER
SWITCH

ON/OFF
AREA LIGHT

PUSH BUTTON FOR
BATTERY STATUS
CHECK 

BREAK-RESISTANT ABS
HOUSING

2 LED AREA  LIGHT

Summary of Contents for START-IT













Reviews: