background image

2

120 volt AC power is supplied through North American three-prong type outlets. The
VEC049D and VEC053D feature two outlets; the VEC050D and VEC054D feature
three; and the VEC051D and VEC056D feature four. The outlets can accommodate
either two- or three-pin AC plugs.

PORT FOR 

REMOTE CONTROL

(SOLD SEPARATELY)

GREEN POWER LED

INDICATOR

VEC049D & VEC053D

Front View Diagram

Back View Diagram

WATTAGE POWER

METER

ON/OFF

POWER

SWITCH

(2) 120 VOLT AC

OUTLETS

RED FAULT 

LED INDICATOR

HIGH-SPEED

COOLING FAN

NEGATIVE (–)

TERMINALS

GROUNDNG

TERMINAL

POSITIVE (+)

TERMINAL

NEGATIVE (–)

TERMINAL

GROUNDING

TERMINAL

POSITIVE (+)

TERMINAL

GREEN POWER LED

INDICATOR

RED FAULT 

LED INDICATOR

ON/OFF

POWER

SWITCH

HIGH-SPEED

COOLING FANS

(3) 120 VOLT AC

OUTLETS

HIGH-SPEED

COOLING FANS

VEC050D

Back View Diagram

VEC054D

Back View Diagram

NEGATIVE (–)

TERMINALS

WATTAGE POWER

METER

VEC050D & VEC054D

Front View Diagram

PORT FOR 

REMOTE CONTROL

(SOLD SEPARATELY)

GROUNDING

TERMINAL

POSITIVE (+)

TERMINALS

3

MAXX SST

Safety Features

Built-in Automatic Safety Features include: 
• Overload and over-temperature shutdown activated if AC output exceeds rated watts
• AC short-circuit shutdown
• Low voltage audible alarm (sounds at 10.6 volts input)
• Low-voltage shutdown (activates at 10.0 volts DC)
• High-input voltage shutdown (activates at above 15.5 volts DC)
MAXX SST

uses a 12 volt DC power source like those found in motor vehicles, or it

can be operated using multiple battery configurations with commercial battery
chargers or solar battery chargers. For most heavy-duty applications, a multiple
battery configuration and the use of deep-cycle batteries is required.
When using multiple batteries, inverters can be operated from one of the vehicle 12
volt batteries, so there’s always one battery with adequate charge to start an engine.
MAXX SST

includes a high-surge capability. This is required to start heavy loads,

such as motors and other inductive devices.

NEGATIVE (–)

TERMINALS

GROUNDING

TERMINAL

POSITIVE (+)

TERMINALS

GREEN POWER LED

INDICATOR

RED FAULT 

LED INDICATOR

ON/OFF

POWER

SWITCH

HIGH-SPEED

COOLING FANS

(4) 120 VOLT AC

OUTLETS

GROUNDING

TERMINAL

POSITIVE (+)

TERMINALS

HIGH-SPEED

COOLING FANS

VEC051D

Back View Diagram

VEC056D

Back View Diagram

NEGATIVE (–)

TERMINALS

WATTAGE POWER

METER

VEC051D & VEC056D 

Front View Diagram

PORT FOR 

REMOTE CONTROL

(SOLD SEPARATELY)

VEC049_thru_56D_Manual_092205  10/21/05  11:50 AM  Page 2

Summary of Contents for MAXX SST VEC056D





















Reviews: