Vector 40-300198, Manual

Page: 2 / 10

SRC-C1T1
CO2+T
EMPERATUR
T
RANSMITTER
/M
ONITOR
Doc: 70-00-0794A, V2.7, 20210310 © Vector Controls GmbH, Switzerland Page 2-10
Subject to change without notice www.vectorcontrols.com
Minimum and maximum values
Using a display & programming module OPA-S, the user has the option to read out and reset the CO2 and temperature
minimum and maximum values. The minimum and maximum values may as well be used as output signals. The minimum
and maximum values are automatically saved to the device and are available after a power interruption.
For OPA- S usage see section “ Displaying minimum and maximum values ” on page 5.
Indication of air quality (CO2 concentration)
Three color LEDs are used to indicate air quality: Green for low CO2 concentration, orange for medium and red for high
concentration. The levels for low-medium-high may be programmed.
Safety
DANGER! Safety advice
This device is for use as a CO2 concentration indicator and a CO2 and temperature transmitter for comfort
applications. It is not a safety device. Where a device failure could endanger human life and property, it is the
responsibility of the client, installer and system designer to add additional safety devices to prevent such a device
failure. Ignoring specifications and local regulations may cause equipment damage and endangers life and
property. Tampering with the device and misapplication will void warranty.
Ordering information
Product Name Product Nr. Description/Option
CO2+Temperature Sensor
SRC-C1T1 40-300198 CO2+temperature transmitter / monitor
Accessories
OPA-S 40-500006 External display and programming module.
Note: For the correct display of values, V1.7 and later is required.
Red-LED
Orange-LED
Green-LED
Air quality LED
No light : No power or unit damaged
Green : High air quality (low CO2 level)
Green + Orange : Good air quality
Orange
: Moderate air quality (medium CO2 level)
Red : Low air quality
Red : Poor air quality (high CO2 level)
Red blinking : 0 ppm calibration
Green blinking : 400 ppm calibration
Default CO2 indication setting
Air quality LED CO2 range in ppm
Green 0… 699
Green + Orange 700 … 999
Orange 1000 …1 299
Red 1300…1599
Red 1600…2000