● Advise other people in the working area to turn the power off when in a break or after using the
equipment because the unit can reach a very high temperature and may cause potentially
dangerous.
● No replace any parts or install the tips before turning the power off and cooling down the
searing-iron to room temperature.
●
The devise shall only be used with rated voltage and frequency. (Refer to the trademark back of
the equipment.)
● Do not use the devise if it is damaged, especially the power supply cord.
● The devise is equipped with a 3-wires grounding plug and must be plugged into a 3-terminal
grounded socket. Do not modify plug or use an ungrounded power socket. If an extension cord
is necessary, use only a 3-wire extended grounding cord.
● Do not use the iron for the other applications except soldering.
● Do not rap the soldering iron against the work bench to shake off residual solder, otherwise the
iron will be damaged by shocks.
● Do not modify the unit by oneself.
● Replace only with genuine parts.
● Do not wet the soldering station. When your hands are wet, don‟t use or disconnect it or pull the
supply cord.
● The soldering process will produce smoke, so make sure the area is well ventilated.
1
.
Summary
This device is an intelligent lead free soldering station with rapid temperature recovery. The
soldering station‟s temperature adopts LCD double temperature display and digital calibration,
rapid and convenience. The sensor is designed in the front of tip and the temperature induction is
very exact and sensitive, the speed of heating and recovery of temperature is very fast. So it is one
of the most perfect tools for lead free soldering.
heating indication
setting temperature
real temperature
alarming mark
Page1