Page 6
Commissioning
1. The commissioning must only be carried
out by a suitably qualified person.
2. Prior to starting the commissioning pro-
cedure, ensure that the ductwork connec-
tions and airflow directions match one of
the options A or B, shown on page 5.
Check that the drain connection is on the
correct side.
3. Before making any adjustments, ensure
that the air valves or grilles are fully open.
4. Please see separate "LCD Control Panel
Commissioning Instructions" for details
on commissioning and user operations
.
WARNING : With the control board panel
removed, 230 volt live connections are
accessible.
Cleaning and Maintenance
WARNING: The unit uses a 230V supply and contains rotating mechanical parts.
Before carrying out any maintenance or cleaning operations the mains electrical supply MUST be discon-
nected
.
The heat exchanger within the unit should be cleaned annually.
To clean the filters and heat exchanger:
The air filters and heat exchanger of the Vectaire WHHR Maxi/Maxi Plus should be cleaned regularly by a suitably
qualified person (the frequency of cleaning will vary depending on the installation environment).
Filters:
•
Slide out the filters by pulling out the tabs.
•
Clean the filters carefully using a vacuum cleaner, replace in the
slots and refit the filter covers
Heat Exchanger:
•
Firstly remove filters as described above
•
Remove the screws securing the front panel and carefully lift off.
Using the plastic strap fitted, carefully pull out the heat exchanger
•
Caution: if this is done during cold weather, the heat exchanger
may contain water. It is advisable to have a plastic bowl available to
avoid spillage.
•
Lightly clean the faces of the heat exchanger with a vacuum
cleaner. Replace the heat exchanger carefully, by sliding the
assembly back into the cabinet.
•
Replace the front cover by hooking the top edge into the slots in the cabinet and secure in place using the
screws.
•
Finally, replace the filters as above.
Never use water or any other fluids to clean the heat exchanger
Filter Replacement
Filters should be replaced annually or after a maximum of 3 cleaning cycles.
Replacement filters are available from Vectaire - call us on +44(0)1494 522333 or email to [email protected]
WHHR Maxi/Maxi Plus /LCD110718
E & O.E
Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH
Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: [email protected]
