Vecow ECX-3200, User Manual

Page: 29 / 147

21 ©Vecow ECX-3200/3100 User Manual GETTING TO KNOW YOUR ECX-3200/3100
2.2.9 Ethernet Port
There are 2 8-pin RJ-45 jacks supporting 10/ 100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel i219 Ethernet Phy; LAN
2 is powered by Intel I210 Ethernet engine. When both LAN 1 work in normal
status, iAMT 11.0 function is enabled.
Using suitable RJ-45 cable, you can connect the system to a computer, or to
any other devices with Ethernet connection, for example, a hub or a switch.
Moreover, both of LAN 1 and LAN 2 supports Wake on LAN and Pre-boot
functions. The pin-outs of LAN 1 and LAN 2 are listed as follows:
Pin No. 10/100 Mbps 1000Mbps
1 E_TX+ MDI0_P
2 E_TX- MDI0_N
3 E_RX+ MDI1_P
4 ---- MDI2_P
5 ----- MDI2_N
6 E_RX- MDI1_N
7 ----- MDI3_P
8 ------ MDI3_N
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network; The LED indicator
on the right bottom corner lightens in solid orange when the cable is properly
connected to a 1000Mbps Ethernet network; The left LED will keep twinkling/off
when Ethernet data packets are being transmitted/received.
DP
DP
HDMI
DVI-I
LAN 2
LAN 1
WLAN
RST
SIM 3 SIM 2 SIM 1
RTC
TypeC
20
LED Location LED Color 10Mbps 100Mbps 1000Mbps
Right
Green/
Orange
Off
Solid
Green
Solid
Orange
Left Green
Twinkling
Green
Twinkling
Green
Twinkling
Green
1 8