11.01.
20
36 59
.
20
36 60
.
05.08.
01.01.
06
36 25
.
25
10.08.
06.01.
11
36 30
.
25
10.08.
10.01.
15
36 34
.
25.01.
30
36 80
.
29.01.
34
36 80
.
«green» is on
= not fertile
«yellow» is on
= computer learning phase
«red» is on
= fertile
«red» blinking
= ovulation day
«red» «yellow» «green»
blinking
= probable pregnancy
«red» «yellow»
«green» on constantly
= pregnancy
«Return» is on
Go back
= Prognosis
Go forward
= Prognosis
Press
«Return»
Review / Preview - Fertility indicator / Prognoses
Fertility indicator
The device shows your measurement value and fertility for that day,
these remain valid for 24 hours and are safe from day 1 onwards.
The number of «green» days will increase slowly though systematically.
«Red» days will be increasingly narrowed down. The Pearl Index is
To display all previous measurement values, press the button
«left» several times. You may also call up a six-day prognosis by
pressing the button «right» several times.
Fever indicator
From 37.8°C upward, the measurement value will alternate with «F» for
fever. Fever will then be stored as measurement value and also shown
in the review. The fever values will, however, not be used for analysis.
No measurement taken
The device calculates the expected cycle curve and your fertility
status, based on existing values. Temperature increases due to the flu,
a lack of sleep, excessive alcohol consumption and/or the use of
medicinal drugs with a thermal effect are «misleading» and are identi-
fied by the device. It is generally recommended to interrupt your daily
measurements in case of a cold with fever, the use of medicine, or a late
night to avoid the input of «misleading» values.
Cancel the measurement process
You may cancel the measurement process by holding the «OK»
button down for 3 seconds; this will take you back to the main
menu. You may then repeat the measurement at any time within
the measurement period.
07:30
10.08.
07: 30
10.08.
.
10.08.
.
36
10.08.
38 45
.
Measurement symbol
is on - Alarm is on
Measurement symbol
blinking
«Fever» alternates with
the temperature value
«Return» is on
Press button to
switch off alarm +
start measurement
Place the sensor under
your tongue
To cancel a measu-
ring process, keep
button pressed for
3 sec.
Press
«Return»
Please note:
LADY-COMP
®
is not intended for
controlling the body temperature
as part of a self-health check,
this should be done with a ther-
mometer.
MEASURING YOUR TEMPERATURE
MEASURING YOUR TEMPERATURE
0.7 (99.3pc) from day 1 onward. If the device receives no input or recei-
ves information that cannot be evaluated, the number of «yellow» days
will increase.
LADY-COMP – 16
17 – LADY-COMP
