AAA
AAA
Insert SD card
11. IMPORTANT INFORMATION
Battery compartment
and serial number
Mini USB port
Serial interface
(for servicing only)
Recessed SD card
compartment
Notches for closing
the device
Measuring sensor port
The measuring sensor can
be replaced at any time by
unplugging it from the port.
Analysing cycle data – reading out data:
Register at www.lady-comp.de. You will receive your personal access
code. You can read out your data via a mini USB cable from there.
Our experienced support team will help you with analysing your data
and be happy to advise you on your personal cycle curve.
[email protected] or call us for any further queries
Mini USB cable
Your LADY-COMP
®
comes with a mini USB
cable included in the product box. This cable
allows you to transfer your data to a PC.
You can also have your cycle data analysed by
your local retailer or by VE Valley Electronics
GmbH. To do this, go to our website or e-mail-
Risk of data loss excluded
Any risk of loss of data stored on your compu-
ter due to empty accu chargers / batteries can
be excluded.
Software programme
The software uses previously input base data,
right from the start. The more regularly you
measure your temperature, the faster the
device will become familiar with your indivi-
dual cycle and be able to interpret it. It will
show more and more green (infertile)
days and the red (fertile) days will be increa-
singly narrowed down.
Nightshifts
Set and activate the alarm by entering the
required measurement time. Let yourself be
woken by the tone the next morning and
measure your temperature as usual. Do like-
wise the next time you change shifts.
Upgrades: Micro SD card
Should you wish to update the software at
a later stage or to upgrade it for further
functionality, we will send you an SD card.
- Open device as described on page 6.
- Remove batteries.
- Insert SD card.
- After completing your update/upgrade, we
recommend removing the SD card in order
to avoid unnecessary power consumption and
ensure a quick reboot of the device.
After the pill
(or other hormone preparations)
Before you begin, you must discontinue taking
the pill. The first bleeding after discontinuing
the pill is a pill-induced withdrawal bleeding,
not a period. Do not input «M» in this case.
Prognosis
The indicators used to predict ovulation and/
or for family planning (boy/girl) are forecasts
and based on the data gathered from previous
cycles. Once a cycle is complete and the
next period commences, the device recalcula-
tes the previous cycle, as it is now possible
to define the exact time of ovulation. This is
done on day 4 of the new cycle.
Restart after interruption
The date, year, and time will continue to run
automatically. The measurement period will be
unblocked for a new input as soon as you
stop measuring, and has to be re-set by setting
the alarm. To do this, set the alarm for the
following morning (before 12pm) and continue
the use as usual.
AAA power accu charger
You may order the required charger from us.
Insert 2 AAA accus in the charger. The pro-
gress will then be displayed on the charger.
Pearl Index
The Pearl Index is a medical value that indi-
cates the safety of a particular contraception
method. Our daily fertility indicator has
a Pearl Index of 0.7 or, to put it simply, is a
99.3pc safe.
Travel and time zones
When travelling to other time zones you may
reset the date and time to the current local
time. Your computer will be ready for measu-
ring the next day, at the desired time of day.
Example:
If one woman out of 100 who uses contra-
ception for a year becomes pregnant, this
corresponds to a Pearl Index of 1.0.
Summer and winter time
Set the clock to summer or winter time,
as described on page 9.
LADY-COMP – 36
37 – LADY-COMP
