2. BEFORE YOU BEGIN
1. Remove the measuring
sensor
2. Open the device
Screw the device open in
counter-clockwise fashion.
Home screen
You will receive your cycle computer with
the time, date and year, already pre-set.
Control button / switch on
Keep the control button pressed until you see
the time/date come up on screen. All menus
can be accessed by pushing the control button
up/ down or right/ left. To activate
the menus and confirm inputs click the centre
of the button.
Back to home screen
Keep the centre button pressed for 3 seconds
to return to the time/date home screen.
Automatic switch off
The device will completely switch off within
60 seconds if no button is pressed. The
screen will then go dark until a button is
pressed or the alarm rings.
Default values
Your cycle computer comes with default
values pre-set before you start. These
are automatically erased as soon as you do
your first measurement or input your own
menstruation data. The default values
will reappear as soon as your own data is
erased.
3. Insert the batteries
Insert the power accus/batteries
as required.
4. Close the device
Put the two parts together at
the notches and screw the device
closed clockwise.
Select the menus via the control button
left, right, up, down
Forward/backward
Select left, right
Select yes, no
Date/time set ahead/set back
Select up, down
Confirm
Confirm input
Keep button pressed for 3 seconds
= back to home
+
«Return» = on (blue square) and
«OK button« (confirm)
= return to prior menu level
AAA
AAA
COMP-N-MB RK.500
Power accus/batteries
Before you start using the device, you will have to insert the batteries.
2 (AAA type) power accus are included with your LADY-COMP
®
computer. You may also use normal AAA batteries that are available
anywhere (1.5V). The two (AAA type) power accus must be charged
for 12 hours before inserting them. The serial number of the device is
written in the battery compartment.
LADY-COMP – 6
7 – LADY-COMP
