To erase all input data, you will have to press «OK» ten times in a row
in the «Delete» menu. In so doing, the display bar will shrink step
by step. If you input any other data (left, right, up, down), the display bar
jumps back to the initial position and you will have to press «OK»
10 times again in order to erase all your data. After erasing the data,
you will find the very default values in the various indicators that
were there when the device was new. Once you start measuring again,
the default values will disappear automatically.
You may do a test measurement to check whether the measurement
process is functioning. To cancel the measurement process, keep the
«OK» button pressed for 3 seconds.
Erase data
Test measurement
Product information
10.08.
.
10.08.
36 48
.
10.08.
36 48
.
Starts automatically -
Measurement symbol
is blinking
Audible signal indicates
end of measurement
«Return» is on
Now measure your
temperature
Press
«Return»
«Return» is on
Press
«Return»
SETTINGS
SETTINGS
«Return» is on
Select cancel
«Return»
Confirm 10 times
with «OK» to erase
all data
Press
«Return»
12345678-31
55%
SNR
Good to know:
The product information contains:
– The serial number of the device (13547206)
– The software status, shown by the last two digits (-31)
– The power accu / battery status
– The surrounding brightness in per cent
Any device error or alert signal is displayed.
For a list of possible errors, please refer to page 38.
LADY-COMP – 32
33 – LADY-COMP
