LVP615D series user manual
Chapter 6: Setup menu instructions
LVP615D supports multiple units cascading splicing. By this way, smaller pieces of LED screens can be
integrated into a large display. For example, if the output definition of LVP615D is set as 1920×1080, and
we put 2 sets of LVP605 together horizontally in parallel, it will be able to connect any LED display of up
to 3840×1080 pixels
There are 16 setup options in splicing setup menu, setup options 1-8 is automatic splicing menu, 9-16 is
fine adjustment, automatic setup menu is used to input splicing screen’s parameters, in fine adjustment
menu option adjust parameters for outputting full picture.
Adjustment options
Descriptions
Automati
c splicing
menu
E.1 LED total width
The whole width and height of LED screen
E.2 LED total height
E.3 unit width
The LED screen resolution and position
compared with the whole spicing screen driven
by this unit of LVP615D
E.4 unit height
E.5 unit horizontal start
E.6 unit vertical start
E.7 sync. splicing
ON or OFF of the sync splicing
E.8 automatic splicing
Application of automatic splicing parameters
Manual
setup
menu
E.9 in width
The size and location of DVI input image the
current unit crops
E.10 in height
E.11 in H-start
E.12 in V-start
E.13 out width
Output parameters of LVP615D, it is as same
as the menu 1. Output image
E.14 out height
E.15 out H-start
E.16 out V-start
Enter adjustment setup:
under splicing mode (Mosaic indicator lit up), by pressing “Setup” button,
LVP615D enters splicing adjustment setup menu “E. Mosaic”
Return to upper level setup menu:
under the mode of adjustment setup, press “
” button, LVP615D
exits adjustment setup.
Note: when use multiple LVP615D cascading splicing, to make sure the output image have uniformity,
every unit’s parameters of 4.3 brightness, 4.1 inpu color, 4.2 sharpness and 8.2 bias must be same.
