LVP615D series user manual
Chapter 6: Setup menu instructions
6.3 Text overlay setting
3.Text overlay
--------------------------------------
3.1 Text overlay
off
3.2 Text source
？
3.3 Text mode
< threshold
3.4 Threshold R
8
3.5 Threshold G
4
3.6 Threshold B
8
6.3.1 Text overlay operation
In the current input signal
，
press
Setup
and press
↓
to select”3.text overlay
”
，
Press
OK
to
enter
，
in the menu“3.1text overlay ” rotate
knob
to switch it on. Then press
↓
to enter”3.2text
source ” menu to rotate
Knob
to select text input signal. Text overlay is on. If need turn it off, enter
3.1 text overlay and switch it off.
6.3.2 Text overlay parameters setting
3.1Text mode
：
LVP615D
can custom text mode < threshold or > threshold. < threshold means text
signal image which is less than the current threshold value will overlay on the current signal. The
bigger part will be automatically filtered out. > threshold means text signal image which is bigger
than the current signal will overlay on the current signal.
Threshold R /G/B
：
This is used to set three thresholds subtitles red, green and blue respectively for
a particular value between 0 to 248.
The following is the text overlay example. Text file is made by Powerpoint. Parameters are as follow:
