LVP615 series user manual
47
splicing
ON
In order to ensure all output images are synchronous to each other, please
note the following settings:
1. The input signals can be only DVI signals, and if the processor is in mosaic
mode, it will be unable to switch input signals;
2.
All the 5 processors must to be set to be the same in output
definitions/resolution.
七、
Remote Control Instruction
LVP615 opens RS232 control protocol supporting PC, Android or IOS
intelligent remote control terminal. Here we instruct the hardware connection
and software operation as below.
(
一
) Hardware Communication
LVP615’s remote control ports include RS232, USB, Wired network and Wifi
control. As below we illustrate hardware communication connection and setup
respectively.
1
3
4
2
LVP615 Remote communication ports
1
:
RS232
2
:
USB
3
:
LAN
4
:
WIFI
1
、
RS232 and USB
RS232 is common port for remote control. When use RS232 control, we only
need to use an RS232 cable to connect PC to processor’s RS232 port, then
we can use software to remote control processor. When PC does not have
Summary of Contents for LVP615 series
