SDVC (speed-dependent volume increase)
To compensate for environmental noise, the volume for audible information increases
as a function of the speed.
☞
Choose a setting for the speed-dependent increase of the volume.
☞
Select
OFF
to deactivate the function or select
1
to
5
to choose the desired volume
increase. 1 is the lowest, 5 the highest volume increase.
Sound Setup
Setting one of the following functions:
–
Sound Reset
: Reset the sound setting to the factory-set
values and switch off loudness.
–
Leveller
:
Activate this function to equalise volume differences
between the various sound sources.
–
Loud Low
:
Set the enhancement of low tones at loudness.
–
Loud High
:
Set the enhancement of high tones at loudness.
–
Bass Freq
:
Select the transitional frequency for the low tones.
–
Treb Freq
:
Select the transitional frequency for the high tones.
Initialisation
See “INITIALISATION”
➽
page 37.
28
SOUND SETTINGS
