Date / Clock
☞
Select the “
Date/Clock
” option from the “
System settings
” menu.
:
The currently selected time zone (offset) and the date and time are shown.
You can set the format for time and date display as well as the time zone.
Time zone:
The navigation system receives the Universal Time Coordinated (UTC) via the GPS
system.
To adjust the difference between your local time and UTC:
☞
Place the cursor on the value behind “
Timezone:
”.
☞
Press
OK
.
☞
Adjust the time offset with cursor keys
4
and
6
.
☞
Press
OK
again to store the setting.
:
The displayed time is updated.
Time format:
☞
Select between 12 hour format and 24 hour format.
Date format:
☞
Select between “day.month.year” and “month/day/year” format.
Remote control
Activate this option if you want to control the system with a VDO Dayton steering
wheel remote control (accessory).
Default settings
Select this option if you want to reset all user specific settings and values to their
factory defaults. All address book entries remain stored.
Service
For analysing hardware and software problems (code protected).
The “
Service
” menu should only be entered for service of the Navigation System by
an authorized service centre.
System information
The “
System information
” menu shows you information on soft- and hardware
versions of the system (for service purposes).
42
SYSTEM SETTINGS
Summary of Contents for MS 3100 -
