background image

28

Settings

Tap the 

Settings

 button in the main menu to change basic settings. 

Tap 

Settings

. A sub-menu opens. Tap the arrow button on the bottom right 

of the screen to scroll through the other pages of the sub-menu.

Tap 

Back

 to exit from a selection list without saving changes. You return to the pre-

vious menu. If you select an item from a selection list or if you tap 

OK

, the selections 

you have made are confirmed and you return to the previous menu.

There are 14 system settings:

 

Map display, Screen, Regional, Address book, Information, Sound, Change route, Simulation,
TMC, Alert points, Position & speed, Select map and System ID.

Map display

This opens a selection of map display settings e.g.:

Heading up

 

Tap this option to select your preferred orientation. You can switch 

Heading up 

On

 or 

Off

. When it is 

On

 the car is heading up (the map faces the direction of 

travel). When it is switched 

Off

 the map is shown with north up (the car travels 

in all directions).

Screen

Tap this option to set e.g. 

Day or night, Colour scheme

 and 

Brightness

Status bar

 The status bar is visible on the bottom of the screen. 

In the 

Settings status bar

 menu you can set a maximum of 4 preferences (e.g. 

local time, remaining travel time, GPS status, current speed). The status bar pre-
ferences can also be changed by tapping on the status bar elements directly.

Regional

This opens a list of regional settings, e.g.: 

Language

 Select your preferred language.

Voice

 Select the desired type of voice.

Km/miles

 Select your preferred unit of measurement.

Clock 12/24

 Select how you wish the time to be displayed: 

12-hour or 24-hour clock.

Address book

You can store addresses as your favourite destinations in the 

Address book

. In 

this menu you can delete these destinations as well. The addresses you have set 
can be used for navigation at any time.

Information

Tap this option to obtain miscellaneous information.

Sound

Choose this option if you want to mute, set volume or set button click. 

Settings

QSG-EHV-2.book  Seite 28  Donnerstag, 27. April 2006  12:02 00

Summary of Contents for MS 2010 -






















Reviews: